|
|
Post by Tim H on Dec 11, 2005 20:43:02 GMT -5
Can anyone help me with the dimensions for building a subframe for a 95 yzf ? I don't want to cut up my frame, in case if it looks like crap , so i would rather build build a bolt on rear frame. I have a r1 tail cone and r6 seats . any help would be great. Thank you Tim
|
|
|
|
Post by Jason Garmon on Dec 11, 2005 23:22:50 GMT -5
Once you bolt up and decide if you're gonna keep it that way, you should go ahead and weld, for the strength, especially if you ride passengers. JMO. As far as the dimension, several guys here have done the conversion. Register and become a member and then send doubledeezy a pm. He's done a gsxr conversion but could probably help you out.  |
|
